Monthly Archives: May 2021
No, we’re not talking about blondes; we are talking about that small vessel that most cruisers carry on their boat primarily to get them to and from shore. However, our dinghy, Day Tripper, serves many more functions than simply moving us to and from land.
For most cruisers who live on anchor and enjoy the water, the dinghy is a means for adventure, transportation, exploration, gatherings, rescue, towing, and the list goes on. In fact, the often neglected dinghy really is a “boat system” that needs research before the purchase as well as care and maintenance after the purchase. The dinghy is so important in my opinion, that its function and onboard management should be considered an integral system when purchasing one’s blue-water cruising boat.
Mary Grace and I have a limited perspective when it comes to blue-water cruising boats and their dinghies; we have had 2 catamarans and 2 inflatable rigid bottom dinghies. Therefore, much of the content of this blog will reflect our viewpoint and experiences; we hope you will share your thoughts in the comment section at the end of this writing.
Factors to consider: Certainly, the choice of dinghy will come down to some mix of the following:
- Intended purpose – this list is almost endless and driven by individual plans.
- Who and how many people will use the dinghy – A family of 6 obviously needs a larger dinghy and more powerful engine than a cruising couple.
- How will the dinghy be stored or carried aboard the big boat – If possible, please consider adopting a “never tow” attitude toward your dinghy. Many dinghies have been damaged or lost while being towed and dinghy lines often become entangled in propellers when helmsmen forget to shorten lines before reversing the main boat. Davits on the transom are an excellent investment that keeps your dinghy safe while underway and discourages theft.
- Budget – Reliability, especially in your dinghy engine, is absolutely critical. Dinghy and engine are probably not the place to go cheap. Find somewhere else in the cruising kitty to save dollars.
In the early days after buying our FP Helia 44, as I stepped out of our 11’6” dinghy with its 15 hp outboard, I had a giant case of “dinghy envy.” Tied up to the very well maintained dinghy dock and right next to my skiff was a beautiful, center console RIB with a brand new 60 hp Yamaha engine and a ski tow bar! In our limited experience, we thought the BVI dock maintenance was what we would experience in most of our travel, and that exotic RIB looked enviable.
After leaving the BVI for other islands in the Leeward and Windward Caribbean Chain, I quickly realized the wisdom and functionality of our very simple, small and practical dinghy! In most Caribbean cruising anchorages, IF there is something called a dinghy dock it is poorly maintained with boards missing, nails or rebar protruding, no cleats or mooring mechanism, and often shallow or surge prone water. All of these features are waiting to destroy any dinghy much less those expensive dinghies seen in the BVIs.
In addition, when out adventuring in the dinghy, we found ourselves pulling our dinghy up on the beach or over a rocky bottom onto the shore. That lovely center console dinghy would be too heavy for us to pull up on the beach and we would have to anchor it a bit off the shore out of the waves.
When the time came for us to buy a dinghy for Ticket to Ride, we already had 5 years of cruising experience to help us decide which dinghy would work best for our needs.
TTR Dingy and Engine:
- Boat: We purchased a new Hypalon Highfield 380 CL from Trade Wind Inflatables in Southern California. TTR’s tender is 12’ 6” short shaft transom weighing 183 lbs. and rated for up to a 30 HP engine. We liked the painted aluminum hull, factory installed hard rubber keel guard, forward locker for a 6 gallon gas can, flat double bottom floor, and oars with oarlocks. This Highfield 380 is the largest length dinghy we thought we could reasonably carry on Ticket to Ride.
- Engine: We purchased a new Yamaha Enduro 2 stroke 15 HP in Caracao and its first use was on TTR’s Highfield RIB. This is the same engine we had on Let It Be’s dinghy and we were incredibly pleased with the reliability and simplicity of this motor. Fuel economy and the amount of noise are not as good as a 4 stroke engine. Our second choice would have been a 20 HP 4 stroke Honda.
There are not many accessories or options available for a small, simple dinghy with tiller steering and pull start; however, there are a few additions we find important:
- Fuel filter: We installed an inline fuel filter which is bolted to the transom and designed for gasoline engines. Fuel problems are the primary reason for small engine problems; I do highly recommend a robust filter.
- Dinghy wheels: Our dependance on dinghy wheels in the Caribbean prompted us to insure TTR’s dinghy would allow installation of the same. We love our DaNard Marine Dinghy wheels for many, many reasons. Whether going up a boat ramp, beach or in shallow unknown water, our DaNard wheels have been invaluable. When deployed, they project 4 inches below the engine skeg tip; therefore, no need to tilt the motor when approaching the beach. The customer service from DaNard has been second to none.
- Anchor and anchor rode: Without getting into the never ending anchor discussions, the anchor we chose is a Box Anchor made by Slide Anchor. Folds easily, minimal or no need for chain, and holds our dinghy in almost any bottom surface. Would not be my choice for the big boat; excellent for the dinghy. We have 40 feet of 5/16 three strand nylon for anchor rode.
- Painter (line): The absolutely terrible condition of some cruiser’s painters is amazing to me. Knots in the middle, too short, totally frayed bitter end, and poorly secured to the dinghy itself. We would suggest a painter line such as 3 strand nylon, spliced to the bow eye (bowline knots come untied when not under pressure), long enough for towing if necessary, and easily tied to a dock, a cleat or your neighbor’s boat.
- Spare 1 gallon fuel tank: We have not YET (Not yet!) run out of fuel in the primary 6 gallon can but this spare is our ace in the hole.
- Cable and lock: Last but certainly not least, a cable and padlock are essential. I would suggest a cable that is at least 10 feet long and thick enough to be secure but not so thick to prevent it from passing through the base of a dock cleat or between two dock boards. The PVC covered lifeline SS cable with crimped looped ends makes up our dinghy cable. The lock: combination or key? We have gone from key to combination and now back to key.
Now that we have discussed the dinghy, the engine and some simple add-ons, let’s talk dinghy best practices. I do not profess to be a US Sailing teacher or know everything on this topic; however, our experience will help in starting this list.
Basic Dinghy Best Practices/Courtesy:
- Boarding and de-boarding: Huge topic here with many variables due to the variety of boat configurations and dinghies. This is one of the many places I will tip my hat to the inflatable dinghies. The stability afforded by the inflatable tubes of a RIB provide an excellent step for boarding. Most experienced cruisers know how to get in and out of their dinghy; however, we have all had guests aboard who are far less comfortable. In general, a well positioned hand hold at or above waist level is incredibly helpful for balancing during boarding. Secondly, an uncluttered dinghy floor reduces the chance of twisting an ankle or falling. Lastly, this is no time to be modest; sometimes the best method is crawling between the dinghy and big boat.
- Be prepared: If Mary Grace and I are going anywhere other than a short trip to shore in daylight both ways, the items taken along are quite different. VHF Radio: anytime we go adventuring or into “open” water. Life jackets: anytime we go away from flat calm water. Lights: going to or from shore in dark we always have a light. We have the official Red/Green/White light attached magnetically to our engine cover; however, a bright dive light held over the side and panned back and forth is more effective. PLB: snatched from our ditch bag when we are really going adventuring. Fuel: check frequently
- Kill switch lanyard: stating the obvious – always wear the kill switch lanyard in case you are thrown from the boat.
- Be courteous: Speeding on a plane through a crowded anchorage is dangerous and lacks courtesy. Slow down and say hello to your neighbors. Don’t be “that guy.”
- Lift it or lose it: Lift your dinghy EVERY night. If you leave your dinghy in the water at night; assume that it will one day go adrift or be stolen.
- Mooring to a dock: Docks used for mooring a dinghy come in all shapes, sizes, and states of repair. Let’s assume a purpose built dinghy dock that is wood, low to the water, and possessing some mooring attachment. Accepted practice is to tie your dinghy painter long and leave the engine in the down position. Lock the dinghy without locking someone else’s to the dock and take your kill switch key. Purpose built well maintained dinghy docks are not the norm; so, a few tips. Absolutely do not take any chances on allowing your dinghy to get below a dock and become pinned – and take tidal changes into consideration. Use a stern anchor in this situation or if the water surges or the dock presents damage possibilities of any sort.
- Landing on a beach: My word of caution: landing a dinghy on a beach and getting off a beach can be VERY dangerous for people and property if there is ANY surf break. Mary Grace and I have done it, don’t like to do it, and half the time it does not go well. Patience, preparedness, and acceptance that you are going to get wet are my best words of wisdom. Using the kill lanyard is critical. With multiple people or less than agile people we skip beach landings.
- Getting in and out from the water: Mary Grace and I don’t teach or test all of our guest about getting back into our dinghy; however, we both are capable of reboarding from the water even when tired. Having a dinghy boarding ladder available for guests is helpful and we often add it to the dinghy when we have guests. We both know the backflip technique for reboarding, which is helpful when tired or without fins.
- Know the limits: Again, last but not least, know your personal limits and the limits of your dinghy. Stay on the main boat when boarding is hazardous, the open ocean is not a place for most dinghies, be very careful at night and when around surf. Use common sense and err on the side of caution.
Buying/replacing a dinghy in most typical cruising grounds such as the Bahamas, Windward Caribbean or the South Pacific is very close to impossible. The answer is to buy a good product up front and maintain it carefully. Let’s talk care and maintenance in particular for an inflatable RIB:
Long Live the Dinghy:
- Rid the sand: Sand is one of the primary killers of inflatables. Keep sand out of your dinghy! Wash feet, flip flops, and gear before loading into your dink. Don’t leave your dinghy half up the beach with waves and sand washing over the transom; another good reason for good wheels which raise the transom above water level. Finally wash your dinghy out often even if washing with salt water. Periodically, pull the boat out of the water, partially deflate the tubes, and thoroughly wash out the area between the tubes and the rigid bottom. Sand gets into this area and grinds away on both surfaces.
- Clean and protect: UV is the other big killers of inflatables. Some cruisers love their “chaps”; we have chosen against chaps for cost and simplicity. We clean our dinghy regularly with a degreasing solution and then treat the Hypalon tubes liberally with 303 Aerospace Protectant.
- Handy repair kit: Patching holes in a Hypalon tube in the field is challenging and often leads to a poor result; however, it will probably be a necessity for most people at some time. A complete dinghy repair kit is essential; we have found Inflatableboatparts.com to be very knowledgable and helpful, plus they carry great products.
- Engine maintenance: Do it like your life depends on that motor; some day it actually might. Sea water impellers, oil changes, lower unit lube, spark plugs, fuel filters, clean and inspect. Always keep a spare prop on board.
Your dinghy is the lifeline between your wonderful life on the big boat and the opportunities and necessities of shore. Purchase the correct product, don’t tow the dink long distances, take good care of the dinghy and this little boat will take good care of you.
We sincerely hope that our readers will contribute their tips and tricks to this post. Sharing information is what the cruising community is all about. Thank you for your read.
As always, thank you for reading our blog. If you are new to dinghies, we hope this gives you some good tips. Those with a lot of dinghy experience, we would love to hear your thoughts in the comments. If you would like to hear from us more often, please see us on Facebook or Instagram.