Now that LIB is finished with her charter life, we are implementing some changes to make her a bit more specific for our use. Some of the changes will be made immediately while still at TMM and others will be made when we are in Puerto Del Ray Marina in Puerto Rico.
My sailing friends can probably imagine several of the items on the list. My land loving friends will probably shake their heads at the items needed. But anyone who knows Frank can imagine the detail and thought put into the list…. Would you wager it is well organized?
I am fortunate to have such a capable captain; and no, I don’t mean the dog!
PDR is a very large marina.
Frank has put together a spreadsheet of changes that includes everything from important functions to pure luxuries. The list includes 66 items that range from maintenance to extravagance; from a one hour DIY to a 3 week contractor job. We will not complete all of the items on our list because we are not sure we truly want all of them and the costs would be prohibitive. Below are some we know we will complete before we leave PR.
Steering on the Helia:
Let It Be is Helia hull #4 and was built with the original specifications. On later hulls, some changes were made to improve the Helia. One major revision was to the steering system which was underrated for the early Helias. We have already had to replace the steering cable on LIB twice. Fountaine Pajot has changed the steering on later Helia models from a teleflex push pull rod system to a hydraulic one. We have reviewed a couple of steering options and decided to install the warrantied system FP is now using. Some people dislike the lack of feedback on hydraulic steering, but we are willing to loose some “feel” in our steering to insure it will hold up to the weight and size of the boat.
Our windless has been extremely reliable and the size is sufficient. However, the whole windless was installed a little too close to the starboard side of the anchor compartment. We cannot fit the manual lever handle onto the gypsy cogs because the handle hits the fiberglass frame of the compartment. This means that if our windless failed, we would have to pull the anchor chain up by hand.
The plan is to move the windless slightly to port so the lever handle can fit onto the gypsy in case we have to use it manually. When we adjust the windless, we will also reinforce the platform of the windless to make it a bit more substantial. While the platform is adequate, we think it would be better if it was stronger.
Finally, we will install a windless remote at the helm station which will deploy and retrieve the anchor as well as count the amount of chain released.
We anticipate using this Lofrans Remote
We found that the most limiting factor in our six week trip this summer was water. It is very possible to live without a water maker, but I found water was a focus of my thoughts whenever we ran low. In other words, running low on fresh water made me nervous. In my opinion, there are many things that require attention while sailing and I don’t want water to be one of them on Let It Be.
RO 30 GPH Watermaker Pre-filter.
We have decided to add a Coltri MCH6 110V compressor to LIB. The convenience of refilling tanks on board and avoiding transporting them in the dinghy every time we need to refill is worth it to us. Plus this allows us to have a total of only 4 tanks on board which reduces the weight on LIB and means we need to find a storage place for fewer tanks.
Coltri MCH6 Dive Compressor
The cushions on LIB have always been an issue with me. They were ordered in a neutral color for a charter situation, but they are BLAND and hard. We will replace all of the outdoor cushions while in Puerto Rico. This is a major investment, but it is also the best way to make the boat unique to us and add some color. I have been wrestling with the cushion material for months now and I am so tired of thinking about it that I am ready to just pull the trigger and order the fabric. I just pray that I like the final product because the cushions will need to last a loooooong time to get our money’s worth!
A combination of this stripe and the solid blue will be used for our new cushions.
These are the big ticket items on our spreadsheet that we know we will install. Other expensive additions we are considering are an enclosure for the helm, a sun shade for the aft side of the cockpit, additional solar panels and new sails. But we are not sure what we want or if these items are necessary, so we will probably put them off until the end of our first full season aboard.
We do have plans to upgrade our communications options, but I will cover that after we have fleshed out our decisions a bit better.
Tortola Marine Management has done an excellent job of maintaining Let It Be, but we want to be sure she is in tiptop shape when we depart. To that end, we have a very long list of maintenance items on the spreadsheet. Frank has done a tremendous job of listing each task along with the supplies, parts and tools required for each one. He has also assigned particular jobs to each of us.
I see a good amount of learning in my near future as I tackle some jobs I never imagined myself taking on. I both look forward to and dread the challenge. I am sure I will have some
embarrassing interesting stories to share. It’s a little daunting to know I will be doing the maintenance on parts we will rely on every single day!
Care to share any tasks you have taken on that you never expected to tackle? I could use the encouragement!
Let It Be has now been in charter for a bit over 2 years (already!) and she has been an excellent boat. Many people have enjoyed sailing her from one beautiful BVI hot spot to the next. We have been very fortunate because most of the maintenance has been routine and expected. In other words, Let It Be has been reliable, fun and predictable.
LIB patiently awaits us.
However, there is one purely cosmetic item we have been anxious to improve ~ the exterior cushions on LIB. The cushions currently aboard have been workhorses, but I think it is almost time for them to be put out to pasture.
Perfectly neutral and acceptable cushions.
We hope to have new cushions fabricated in September so they will be ready for the post hurricane 2015 season. While choices are not final, the current front runner of color pallets is the one pictured below:
This could add a lot of pop!
I think that teal blue with lime green piping could make some beautiful cushions. Add some accent pillows in the stripe material and a few others in the tangerine and LIB will look mighty pretty, I think.
We plan on taking a sample of the teal blue with us on our next trip, just make sure it doesn’t get too hot in that Caribbean sunshine. We sure don’t want our guests getting scorched each time they sit at the helm!
Do you think those colors will be beautiful or do you prefer a more traditional, single color theme?
I’m not sure all parents are this way, but we love to share our “toys” with our kids. Seeing them become proficient and learn new skills is something we focused on while raising our two sons.
Clayton and Natalie
We were thrilled when our son, Clayton, asked if he could spend his senior year spring break on Let It Be with some of his friends.
A few of our friends thought we were crazy to lend our future home to our 22 year old and 7 of his closest friends for Spring Break, but we think trust and responsibility go hand in hand. If we can’t trust our kids with our things, we failed to teach them responsibility as they grew.
Well, Spring Break is over, the trip is in the books, and the kids had a great time. Jonathan Healey generously shared his photos from the trip and said I could share them here and on FB. It looks to me like Jon has a pretty good eye for photography. Here are a few of his photos:
Jon (photographer) at the helm and Andrew tending lines.
Taylor keeps a look out as they pass Oil Nut Bay.
Andrew – come back!
Outside of Foxy’s Taboo.
Returning from the Bubbly Pool.
Nighttime comes quickly.
I am hoping Clayton will guest post in the future, share more photos and tell us about spring break, on a boat, in the BVIs, with a bunch of college kids and acting as captain.
I’m so happy to know this great group of young adults. They are interesting individuals and very caring people. Let It Be was in good hands.
We had another excellent visit to Annapolis. I think this is the first time we had a whole day that was sunny and beautiful! The weather this year was much better than last year but the show felt less crowded this time.
We successfully gathered information on several systems including water makers, top down furlers and fuel polishing systems. We have not bought any of these pricey little numbers yet, but we have a much better idea of what is on our wish list.
We were impressed by the FilterBOSS fuel polishing system. The owner, who spends about six months a year living on his sailboat, was very patient and thorough in explaining the system and our options. Because LIB has one fuel tank, two engines and a generator, we agreed that the best option for our purposes would be a combination polishing/filter unit to supply fuel to the port engine and genset. This would allow us to clean the fuel and return it to the tank and filter the fuel before it enters those two engines. On the starboard engine we would use the fuel filter system only. By spending a few extra dollars, we can add a water alarm to the polishing/filter unit.
We are very close to buying this system because it would help prevent any fuel problems and assure our charter guests that LIB’s engines run smoothly. Anyone who has been around marine engines knows the troubles bad fuel creates and we would like to prevent those issues for our guests.
One item we did order is a beefier anchor. While no one has reported any trouble with our current anchor, we think this one will improve guest confidence:
Spade anchors routinely come out at the top of Practical Sailor reviews and the physics of this anchor makes sense to us. The current anchor on LIB has worked well, but we wanted to step up our confidence on the hook. For us, Spade was the answer. This upgraded anchor will allow guests to feel more secure at anchor and increase their confidence when sleeping on the hook. Thankfully, Spade is shipping our new anchor as it is surely over the maximum suitcase weight allowed on the airplane.
We have not finalized our thoughts on water makers, but currently RO is at the top of our list. We both like the idea of replacement parts that are easy to find and the people we have spoken with are very happy with their ROs.
Top down furlers were interesting and I was glad to talk with a few dealers and compare the products but we have not decided if we will invest in one. Several times when flying our spinnaker, we have used it as a dead downwind sail and have flown it attached to the windward forepeak instead of to the bow sprit. A furler would remove this option and we are not ready to accept that limitation yet.
Since a water maker and a top-down furler wouldn’t affect charter guests, they are not a priority at the moment.
We did buy a few other things, but I’ll cover those in a separate post.
Let It Be is not chartered during September, so TMM is using this month to take care of some general upkeep so she will be in great shape for the next charter group.
Most of the items will go unnoticed by our guests, but we are happy to see some
items removed from our To Do list.
One of our favorite features of the Helia is the large window and door that opens from the salon to the cockpit. The door and window were a bit finicky from the very beginning and were a factory warranty issue.
TMM has worked on this issue several times and now has adjusted the door and window so they work properly. I’m glad this distinguishing feature is now as awesome as it can be.
Most of the maintenance items will be undetectable but they do keep LIB in excellent working order so our guests can be confident that all systems on board work well. Our goal is to provide a very well maintained boat because the last thing we want is a mechanical issue to mar your vacation.